Sylvania SY4100, Руководство пользователя, Страница: 15 / 28

14
l
SP DIAL + 5 , the autodial order is: : Preset 5 : Preset 1 : Preset 2 :
Preset 3 (Fire condition)
l
SP DIAL + 6 , the autodial order is: : Preset 6 : Preset 1 : Preset 2 :
Preset 3 (Medical help condition)
Arm or Disarm Via the Telephone Line (for Tone Mode)
This function allow s you to dial your home telephone from outside and remotely
control/change the arm/disarm status of your security system. When you hear a long
‘Beep’ sound after 10 rings on the phone, enter the ‘Master code’135246 (default). If the
password is correct, the system will respond with a long Beep sound (if the password is
less than 6 digits, you will need to enter the # button to finish the password entry).
One ‘Beep’ sound indicates that the system is in the ‘Armed-Away’ mode,
Two ‘Beep’ sound indicates it’s in the ‘Armed-Home’ mode
Three ‘Beep’ sound indicates that the system is ‘Disarmed’
.
You can now key-in (1, 2 or 3) to change the status. The Main console will respond to the
relative message as listed below.
Response message as listed below:
l
Pressing 1 indicates that the system is ‘Armed-Away’. You will hear one ‘Beep’
sound through the phone.
l
Pressing 2 indicates that the system is ‘Armed-Home’. You will hear t w o ‘Beep’
sounds through the phone .
l
Pressing 3 indicates that the system is ‘Disarmed’. You will hear three ‘Beep’
sounds through the phone.
If the system has been programmed in the ‘Armed-Away’ or ‘Armed-Home’ mode,
you need to ‘Disarm’ the system with the first call and a second call to change the
Arm status. If you do not disarm first, and press ‘1’ or ’2’ directly, the system will
emit ‘bi-bi-bi’ and reject your setting. You must press ‘3’ to disarm first.
Note: this function will work on touch- tone service lines only
Auto-dialer priority
This system stores up to six (6) telephone numbers in the Main Console. If it is triggered
and an alarm is activated, the auto-dialer will call the 4 preset telephone numbers that
you programmed (listed below) and play your pre-recorded message.
If system is triggered:
Burglary help
- It will automatically dial Preset 4 Preset 1 Preset 2 Preset 3
phone numbers for 3 cycles (4, 1, 2, 3). When the telephone
is answered, it will playback the message 2 times
Fire help - It will automatically dial Preset 5 Preset 1 Preset 2 Preset 3,
phone numbers for 3 cycles (5, 1, 2, 3). When the telephone
is answered, it will playback the message 2 times
Medical help
- It will automatically dial Preset 6 Preset 1 Preset 2 Preset 3,
phone numbers for 3 cycles (6, 1, 2, 3). When the telephone
is answered, it will playback the message 2 times