8
opTioN 1:
Use the spare KD nuts, KD screws and plastic connectors.
1. Place the plastic connector on the mantel unit and mark the
drill-holes as shown in Fig. B.
Fig. B
2. Drill the holes with diameter 3/4 inches (10 mm) and depth
3/4 inches (10 mm) on the mantel. Each plastic connector
needs 3 holes. See Fig. C.
Fig. c
3. Gently install the KD nuts into the drilled-holes with hammer
as shown in Fig. D.
Fig. d
4. Attach the plastic connector and lock in place with KD screws
as shown in Fig. E.
Fig. E
opTioN 2:
Use the small l-brackets and screws.
1. Place the small l-bracket to the unit as shown and mark the
drill-holes on the mantel as shown in Fig. F.
Fig. F
2. Drill the holes with diameter 1/16 inches (2 mm) and depth
5/16 inches (8 mm) on the mantel. Each SMALL L-BRACKET
needs 4 holes. See Fig. G.
Fig. g
3. Attach the SMALL L-BRACKET and lock in place with SCREWS
as shown in Fig. H
Fig. H
Fig. H