Sygonix UH-730, Руководство по эксплуатации

Страница: 9 / 52

7. Installation and start-up
The camera can be used both indoors and outdoors. It has the degree of protection IP66, i.e. it
can also be mounted outdoors without protection against the weather.
Nevertheless, we recommend that you install the camera in a protected place as far as possible.
a) Mounting the camera
As a rule, the wall bracket is disconnected from the camera during the delivery. If this is not the
case, loosen the two set screws of the wall bracket, which are located directly on the camera,
and pull the wall bracket away from the camera.
Now mount the wall bracket first.
• If dowels are required to fix the wall bracket to your wall (depending on the condition), mark
the exact position of the mounting holes through the holes in the wall bracket.
Mount the camera only on a stable surface, but not on metal surfaces or near other
electrical/electronic devices.
When drilling mounting holes or screwing into place, ensure that no existing cables or
pipes are damaged.
Select the installation site so that it is protected against attempts to tamper with the
surveillance camera. For this reason, the surveillance camera should be mounted at
a minimum height of 2.5 m.
• If necessary, insert the dowels into the mounting holes.
• Take the black sponge out of the box, remove the
yellow protective foil and stick it in the holder as
shown in the picture.
The side recess in the sponge must be aligned
so that it faces one of the two recesses (for the
cable) in the wall bracket. Depending on which
side you want to lead out the cable.
• The small, round part of the sponge is not
needed.
9