Sygonix UH-730 Скачать руководство пользователя страница 3

Страница: 3 / 52

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with statutory national and European regulations.
To ensure that the product remains in this state and to guarantee safe operation, always follow

the instructions in this manual.

These operating instructions are part of this product. They contain important informa-

tion on setting up and using the product. Do not give this product to a third party

without the operating instructions. Therefore, retain these operating instructions for

reference!

If there are any technical questions, please contact:
International:

www.conrad.com/contact

United Kingdom:

www.conrad-electronic.co.uk/contact

2. Explanation of symbols

The symbol with the lightning in a triangle indicates that there is a risk to your health,

e.g. due to an electric shock.

The symbol with an exclamation mark in a triangle is used to highlight important infor-

mation in these operating instructions. Always read this information carefully.

The arrow symbol indicates special information and advice on how to use the product.

Содержание UH-730





















































Результаты поиска

Содержание UH-730

Отзывы:

Похожие инструкции для UH-730

Бренды по названию

Популярные бренды

Sygonix UH-730, Руководство по эксплуатации

Результаты поиска

Содержание UH-730

Отзывы:

Похожие инструкции для UH-730

Бренды по названию

Популярные бренды