General
Page 4/52
Installation, commissioning and operating instructions
SYCLOPE
TERE’O Touch
®
CU/PT
I.
General
1)
Field application
The analyser/controller of the
SYCLOPE TERE’O Touch
®
range you have just purchased is an electronic
swimming-pool water management device. It has been carefully developed and manufactured to ensure
your greatest pleasure and peace of mind.
Its remarkable capacity for adapting to different conditions and sizes of private or public swimming pools
means it can be installed in the most difficult of environments where control of water treatment and
swimming-pool water regulation processes are decisive.
The
SYCLOPE TERE’O Touch
®
range are equipped with one temperature entry and two specific
electronic card adaptors for pH, ORP or chlorine/bromine for measurements using specific sensors for
treating swimming-pool water and also include regulations processes with cyclic commands transmitted
by means of two relays to control pH and chlorine levels.
The simplicity of operation of the
SYCLOPE TERE’O Touch
®
, the user friendliness and the remarkable
technical aspects of these devices, will ensure you benefit from their many options, guaranteeing you full
control and supervision of the quality of the water in your swimming pool.
The following instructions contain all the information required for the installation, use and maintenance
of your new equipment.
➢
Packaging
➢
Installation
➢
Technical specifications
➢
Commissioning instructions
➢
Safety tips
If you would like to receive further information or if you encounter any difficulties not described in this
manual, please contact your usual retailer or else directly contact the sales department of SYCLOPE
Electronique in France, either at the agency or at the office for your region or country, or the
technical/quality departments of our establishments. We will do everything in our power to help you and
ensure you benefit from our advice and know-how in the field of measurement and treatment of
swimming-pool water.
Contact :
