SWR Envea M-Sens 2, Руководство по эксплуатации

Страница: 23 / 27

23
6. Digital inputs
It is only necessary for stopping and starting
the measurement via an external control line
(for wiring see 9)
With and you make a choice
according to the display. With you quit
the menu point without any change and with the input is accepted and you
arrive 1 menu point lower to make your settings.
6.1 Digital input 1
With and you make a choice
according to the display. With you quit
the menu point without any change and with
the input is accepted and you arrive 1
menu point lower to make your settings.
6.1.1 Function
No function / M-Stop / Product choice - Start /
Stop of the device via external control signal.
With and you make a choice
according to the display. With you quit
the menu point without any change and with
the input is accepted and you quit the menu level.
6.1.2 Effect direction
Direct / inverted
With and you make a choice
according to the display. With you quit
the menu point without any change and with
the input is accepted and you quit the
menu level.
6.1.3 Filter
Dead time after activating (for debouncing
of mechanical switching contacts).
Range of 0 ... 99.9 s
With you set the value to 0.0. With the
numbers you input the beginning value and
with the input is accepted and you quit the menu level.
6.2 Digital input 2 - analogue to digital input 1
C
8
£ ¤
Digital input 1
£
Function
¤
none
C
8
Digital input 1
£
Effect direction
¤
direct
C
8
6. Digital inputs
£
6.1 Digital input 1
¤
6.2 Digital input 2
C
8
6.1 Digital input 1
£
6.1.1 Function none
¤
6.1.2 Direction direct
6.1.3 Filter 1.0 s
C
8
Digital input 1
7 8
9
Filter
4 5
6
1.0
s
1 2 3
C
0
8
C
8
£ ¤
C
8
£ ¤
C
8
C
8
£ ¤