16
1.4.6 Calibration point 1
Measurement range start and end
1.4.7 Measured value
Record of input value
1.4.8 Calibration point 2
1.4.9 Calibration
... (depends on the number of the
calibration points)
1.4.10 Calibration point N
Measurement range init and end
1.4.11 Measured value
Record of input value
For 2.1 to 2.4 / 3.1 to 3.4 / 4.1 to 4.4 - same way
5. Analogue output
5.1 Beginning of range
Range of 0 ... 22 mA (Standard 4 mA)
5.2 End of range
Range of 0 ... 22 mA (Standard 20 mA)
5.3 MIN limit
Range of 0 ... 22 mA (Standard 3 mA)
5.4 MAX limit
Range of 0 ... 22 mA (Standard 20 mA)
5.5 Alarm value
Range of 0 ... 22 mA (Standard 3 mA)
5.6 Filter time
Range of 0.1 ... 999.9 s (Standard 1 s)
5.7 Calibration: 4 mA
Adjust output current
(calibration to 4 mA)
5.8 Calibration: 20 mA
Adjust output current
(calibration to 20 mA)
6. Digital inputs
6.1 Digital input 1
6.1.1 Function
none / measurement stop or
product choice
6.1.2 Effect direction
direct / inverted
6.1.3 Filter
Range of 0.1 ... 99.9 s
6.2 Digital input 2
6.2.1 Function
none / measurement stop or
product choice
6.2.2 Effect direction
direct / inverted
6.2.3 Filter
Range of 0.1 ... 99.9 s
7. System
7.1 Baud rate
Choose: 4800 / 9600 / 19200 / 38400
7.2 ModBus address
Range of 1 ... 255
7.3 Contrast
Adjust contrast
7.4 Language
Choose: D / F / E
7.5 Backlight
Backlight constant = 0
or delay of backlight in minutes
Range 1 ... 99 min
7.6 T-display
Sensor temperature display on / off
