background image

- Setting up -

49

3.5 

Charging the standard batteries 

The standard rechargeable batteries for the handset have a stand-by time of max. 100 
hours at room temperature and a maximum talk time of 10 hours.  To charge the batteries, 
place the handset in the base station with the display to the front. The handset will be 
charged in rapid charge mode for the first 30 minutes. While this is happening, the boxes in 
the capacity display will come on one after the other. Charging will then switch to the normal 
charging mode and the battery capacity display will be on constantly.   

The current battery capacity is shown in the display. 

If the battery capacity is too low, the 

 symbol will appear in the display and you will 

hear warning tones every 20 seconds. 

Note:

 Exactly like your car battery, the standard rechargeable batteries are unavoidably 

subject to a certain ageing. However, you can have an influence on this ageing process by 
"training" the standard batteries to a certain extent. In regular use of the phone, if you 
cyclically charge and fully discharge the standard batteries by using the telephone until the 

 symbol appears in the display, a demand is placed on the batteries and they will repay 

you by giving maximum performance and a long life. Extended charging and extended 
discharging on the other hand will both degrade the capacity and shorten the life of the 
standard batteries. 

Содержание D6005


















Отзывы: