switel D6005, Руководство по эксплуатации

Страница: 7 / 17

- Operation -
50
4 Operation
4.1 Receiving calls
When an incoming call arrives, the ringing tone sounds on the handset. The EXT symbol
will flash in the display. Press the call button on the handset and the connection will be
made. The call will be automatically taken as soon as you lift the handset from the base
station. To end the call, replace the handset in the base station or press the call button
on the handset.
4.2 Making calls
1. Enter the required telephone number with a maximum of 25 digits using the number
pad. The numbers pressed are shown in the display.
2. Press the call button and the required connection will be made.
The call duration in minutes and seconds is shown in the display during a call. Ten
seconds after dialling, the display will switch from showing the number dialled to showing
the duration of the call. The call duration will still be retained in the display for a few
seconds after the call has been ended.
3. To end the call, press the call button or replace the handset on the base station.
Note: If you have entered a number incorrectly, you can delete the number by repeatedly
pressing the button. The number is completely deleted by pressing the button for a
long time.
You can also get a dialling tone by first pressing the call button . On entering the digits of
your required phone number, your telephone will dial the number directly. With this method
of making a call, it is not possible to correct individual digits in the number in the manner
described above.
4.3 Adjusting the receiver volume
There are three volume levels available to you if you should want to change the receiver
volume on the handset.
Press the button twice during a call . You can select the required volume using the
and buttons. The selected volume will be shown in the display.
[---]
= Loud
[-- ]
= Medium
[- ]
= Soft
The display will go off after a few seconds.
4.4 Redial facility
Use Redial if the person called is engaged or does not reply.
1. Press the button and the last phone number dialled will be shown in the display.
2. Now press the call button and the telephone number displayed will be
automatically dialled.