switel D6005, Руководство по эксплуатации

Страница: 8 / 17

- Operation -
51
4.5 Muting the microphone
In this way, you will be able to speak without the other person hearing you.
Switching off the microphone: Press the buttons - - one after the other.
The symbol will appear in the display.
Switching on the microphone again: Press the buttons - - again and you
will be able to continue speaking to the other party.
4.6 Keypad lock
With the keypad lock, you can prevent a button on the handset being pressed accidentally.
Incoming calls can be received as normal even when the keypad lock is switched on.
Activating the keypad lock: Hold the button pressed until you hear a signal tone.
The symbol will appear in the display.
Deactivating the keypad lock: Hold the button pressed again until you hear a
signal tone and you will be able to use the handset normally once more.
4.7 Range information
The range of the handset is ca. 50 m in closed rooms and ca. 300 m outdoors. When there
is a good contact with the base station, the symbol will come on in the display. The
symbol will disappear if you are too far away from the base station.
4.8 Paging from the base station to the handset
If you cannot remember where you have left the handset, press the paging button on the
base station. You will now hear the handset audible signal for 30 seconds and thus be
easily able to find it again.
You can cancel the audible signal by pressing any button on the handset.
4.9 Temporary tone dialling
If you can only use your telephone in Pulse Dialling mode, you do not have to forego the
facilities of Tone Dialling (e.g. interrogating an answering machine). Press the
button for
two seconds during a call to switch temporarily to TONE dialling.
PULSE dialling will be reselected at the end of the call.
4.10 Private exchanges
You can use the "R" signal button on your telephone on private exchanges. If you have
connected your telephone to a private exchange, you can use all the facilities such as call
transfer, automatic recall, etc. The "R" signal button gives you access to these facilities. The
FLASH time "120ms", “250” or “600ms” will be required on a private exchange (Adjustment,
see 6.4 ).You can find out from the dealer from whom the equipment was purchased
whether your telephone will work on your private exchange without any problems.