background image

- The phone book - 

53

The phone book 

You can store 10 phone numbers, each with 25 digits, in the phone book of your handset. 
The numbers 1 to 9 and 0 serve as memory locations and these numbers are also used 
later to call the stored phone numbers. 

5.1 

Entering numbers in a phone book 

1.  Enter the required telephone number with a maximum of 20 digits. 

2.  Now press the 

 button. The message 

STORE TO

 will appear in the display. 

3.  Now press the required storage location 1 to 9 or 0. You will hear a signal tone and 

the phone number will be stored on the selected button. 

In order to cancel the storing process, press the 

 button briefly and then press and hold 

the same button 

 until no more numbers are shown in the display. 

Phone numbers already stored will be automatically deleted when a new number is stored 
on the same button.  If a call is received during the storing process, entry of the number is 
interrupted and will have to be repeated. 

5.2 

Dialling stored numbers from the phone book 

After you have stored a few phone numbers, you can call these up very quickly and easily.  

1.  Press the phone book button 

.  The message 

SELECT 0 – 9 

will appear in the 

display. 

2.  Now press the required memory button 1 to 9 or 0. The selected phone number will 

be shown in the display. 

3.  Press the call button 

 and the telephone number displayed will be automatically 

dialled. 

5.3 

Special number in memory location 0 

You can store a special phone number in memory location 0. Use this memory location for 
a special dialling code or a special telephone number. 

This number will be activated by pressing and holding the 0 button until a signal tone is 

heard and can be dialled directly by means of the call button 

.

Содержание D6005


















Отзывы: