switel D6005, Руководство по эксплуатации

Страница: 5 / 17

- Setting up -
48
3 Setting up
3.1 Safety Information
WARNING! Before setting-up, it is essential that you read the General Information at the
beginning of this manual.
3.2 Check contents of pack
The following items are supplied:
one base station with foot support one mains power supply
one handset two standard batteries
one telephone connecting cable one instruction manual
3.3 Connecting the base station
Position the base station near to your telephone connection socket and to a mains socket.
Your telephone works using Touch-Tone Dialling.
1. Insert the plug of the power supply into the socket on the rear of the base station and
plug the power supply into a properly installed 230 V mains socket. The plug-in power
supply for the base station must always be connected. For safety reasons, use only
the plug-in mains power supply provided.
2. Connect the telephone cable supplied to the telephone socket and the telephone jack
on the rear of the base station. Use only the new telephone cable provided.
3. Fix the foot support in position and run the cable through the opening to the rear.
3.4 Fitting standard batteries
To fit the standard rechargeable batteries supplied into the handset,
press on the upper edge of the battery compartment and slide it
downwards. Now insert the batteries taking care to ensure that the
polarity is correct. Close the battery compartment cover.
Important note: Place the handset in the base station with the display to the front for at
least 16 hours . The telephone may malfunction if the batteries are not properly charged.
The charging light on the base station will come on.
+
AAA
+
AAA