30
Functions during a call
CX 253i / SWZ PTT en / A31008-X353-P100-1-19 / during.fm / 03.12.2007
Conference call
Precondition:
You have established an enquiry call (page 27 and page 28).
There is both an active call (the one established with an enquiry call) and a held call (the
first). In a conference call you can speak to both other callers at the same time.
It is possible to conduct two conference calls at the same time on your base station.
Establishing a conference
You are making an enquiry call. The first caller is put on hold.
Press the display key
CONF.
to establish conference switching.
Ending a conference
You have several options for ending a conference call:
Forwarding an incoming call – CD (Call Deflection)
CD enables an incoming call to be diverted to any phone number while it is ringing,
without having to answer the call.
You can pre-set a divert destination (page 103), dial a phone number from the
Phonebook or enter a new number.
Forwarding a call to another terminal
You are making an
external
call and would like to transfer it to another internal
+terminal.
Establish an internal enquiry call (page 28) and replace the receiver (before answer), to
forward the call.
i
You can make a conference call with
◆
two external users or
◆
with one internal user and one external user.
either ...
You end the conference:
a
Replace the receiver (return to idle status).
or ...
You change the conference to an enquiry call:
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
INDIV.
Press the display key to change the conference
switching to an enquiry call (page 27 or page 28).
The connection that was active immediately before
the conference was established becomes the active
call again.
i
Open the menu.
s
Forward
Select the menu item and confirm.
The pre-set divert destination is dialled.
OK
