105
System settings
CX 253i / SWZ PTT en / A31008-X353-P100-1-19 / settings_bs.fm / 03.12.2007
Setting up ring delay
Ring delay can be used to individually set up a party per incoming MSN to ring later.
During this ring delay time, the terminal can take the call using the function
Accept?
without hearing a ring. The ring delay time is given in rings. There are 5 seconds
between rings.
The factory default setting is 0 rings (= not activated).
Take into account the response time of the answering machine when making this
setting (default:
Automatic 2/4
). If the set ring delay is longer than the setting for an
active answering machine, the phone will not ring, because the answering machine will
answer it first.
For each programmed MSN, at least one subscriber must be able to be called
immediately. Therefore, a party set up for ring delay will be called immediately if he is
the only one on this incoming MSN, or no one else can be reached on this incoming
MSN.
Picking up a call during ring delay (Call PickUp), see page 24.
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
Setup user
Select the menu item and confirm.
s
Setup device
Select the menu item and confirm.
s
Int.11
W
Select internal number and open submenu,
e .g.
Int.11
.
s
Ring delay
Select the menu item and confirm.
s
Select the receive MSN and confirm,
e.g.
MSN1: Anna
.
~
No. of rings
enter and confirm, e.g. 2.
OK
OK
OK
OK
OK
OK
OK
OK
