![Swisscom Top E604 ISDN Скачать руководство пользователя страница 18](http://html1.mh-extra.com/html/swisscom/top-e604-isdn/top-e604-isdn_user-manual_1415095018.webp)
16
Preparing the base station for use
CX 253i / SWZ PTT en / A31008-X353-P100-1-19 / starting.fm / 03.12.2007
Launching the Getting started wizard and setting the basic settings
You can operate the Getting started wizard of your base station either directly using the
base station or via the handsets.
Launching the Getting started wizard:
Setting the date and time:
The date and time are transferred automatically from the telephone network during the
first outgoing call.
The display shows:
Enter time?
If the time should be displayed in 12-hour mode, you can modify the setting later
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Installation
Select the menu item and confirm.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
Press the display key to launch the Getting started
wizard.
If you already have set a system PIN (not 0000)
(page 89), you will be asked to enter it.
~
If required, enter the system PIN and confirm.
OK
OK
OK
i
◆
The Getting started wizard cannot be used simultaneously by multiple
internal users.
◆
If there is already settings data (factory default or previous settings),
this data is shown at the appropriate positions in the display and can
be modified there.
◆
To cancel the Getting started wizard, press the exit menu key and
hold. All changes you have already saved using
Save entry
§§OK§§
are
retained. The base station returns to idle status.
◆
To skip a setting, press the display key
§§NO§§
.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
Press the display key to set the date and time.
~
Enter the date (6-digit) and time (4-digit in 24-hour
mode) in series, e.g. 200903 0945 for 9/20/03
9:45 a.m..
W
Press the display key to open the submenu.
Save entry
Select the menu item and confirm.
OK