Swift Group Bessacarr 2006, Руководство пользователя

Страница: 87 / 121

Equipment Details
Failure : The refrigerator does not cool sufficiently.
Possible cause Action you can take
Inadequate ventilation to the unit. Check that the ventilation grilles are not
covered.
The thermostat setting is too low. Turn the thermostat to a higher setting.
There is too much ice on the condenser. Check that the refrigerator door seals
when shut.
Too much warm food put inside. Let food cool down first.
Appliance running for a short time Wait several hours, check again.
4. Press and hold
rotary switch (B).
5. Activate Piezo
ignition (C)
several times
at intervals of
1 sec.
6. Once the flame
has been ignited
and is burning,
the needle of the
galvanometer
passes over into
the green section.
7. Release igniter button (C). Keep rotary
switch (B) depressed for another 10-15
seconds, then release.
8. Check the flame indicator to see
whether a flame is burning.
9. Repeat the entire process if the flame
has gone out.
10.Use rotary switch (B) to regulate the
temperature in the main refrigerator
compartment.
DOMETIC RM 7630
APPLIANCES WITH CURVED DOOR AND
GALVANOMETER
Manual ignition with “Piezo” igniter
The refrigerator is equipped to operate mains
power, DC or liquid gas. The desired power
option is selected by means of energy
selector switch (A) which has four settings:
- Off (O)
- AC mains
power (230V)
- DC (12V)
- Liquid gas
(Gas).
Electrical operation
Please refer to the manual
Gas operation
1. Open the valve of the gas cylinder
2. Open the shut-off
valve to the gas
supply.
3. Set energy selector
switch (A) to Gas.
A = energy selector switch
B = gas/electric thermostat
C = manual ignition button
D = flame indicator device ( galvanometer)
83