Swift Group Bessacarr 2006, Руководство пользователя

Страница: 74 / 121

Equipment Details
70
A = energy selection switch
B = gas/electric thermostat AC/DC
C = operating displays (3 LEDs)
A = energy selection switch
B = gas/electric thermostat AC/DC
C = operating displays (4 LEDs)
D = temperature setting display
E = dimmer for LED-displays
(only accessible when door opens)
Gas
AC mains power
12V DC
Automatic energy
selection
OFF
Warning: To avoid deterioration of
materials:
• Do not use soap or hard, abrasive or
soda-based cleaning agents.
• Do not allow the door seal to come
into contact with oil or grease.
Using the refrigerator
• The cooling unit is silent in operation.
• When the appliance is first put into
operation, there may be a mild odour
which will disappear after a few hours.
• Ensure the living area is well ventilated.
• The refrigerator will take several hours to
reach its operating temperature in the
cooling compartment
• The freezer compartment should be cold
about one hour after switching on the
refrigerator.
Controls
A. Manual energy selection MES
(eg RM 7XX1 L)
B. Automatic and manual energy selection
AES ( eg RM 7XX5 L)
Note: The refrigerator is equipped to operate
on mains power, DC or liquid gas (propane/
butane). The desired power option is
selected by means of energy selector switch
(A) . Energy selector switch (A) has four
settings: AC mains power, DC (12V), Gas
(liquid gas), OFF .
Appliances with automatic energy
selection have the additional setting
"AUTO".
MANUAL ENERGY SELECTION
ELECTRICAL OPERATION
12V - operation (DC)
Warning: The refrigerator should only
be used while the motor is running,
otherwise the on-board-battery would
be discharged within a few hours!
1. Set energy selector switch (A) to 12V .
2. Operating display "C", 12V lights "green".
Appliance is in function.
3. Use rotary switch (B) to regulate the
temperature in the main refrigerator
compartment.