Swift Group Bessacarr 2006, Руководство пользователя

Страница: 109 / 121

Equipment Details
6. Secure by tightening the Mast Locking
Collar and Wall Bracket
REMOVING THE ANTENNA
A permanently fitted Status can be easily
removed leaving only the Mounting Foot and
rubber gaiter.
1. Unplug the antenna from the Power Pack.
2. Loosen the Mast Locking Collar and Wall
Bracket and lift off whilst feeding out the
cable.
3. Push the Blanking Cap supplied into
place.
IMPORTANT – The Blanking Cap is a
temporary seal and is not for long term use.
FIAMMA F45i SIDE AWNING
• In order to avoid
unnecessary
strain on the
awning as well
as on the vehicle
side, we suggest
that the legs be
extended about
1m from the opening.
• Unscrew the leg
knob to slide the
leg out of its
seat.
• Grasp the leg
near its hinge-
joint and pull it
in a horizontal
direction.
• Lower the leg as
shown in the
figure.
• After unrolling
the awning
completely,
adjust the legs
at the chosen
height.
• To avoid that the awning is lifted up by an
unexpected gust of wind, it is necessary
to secure the legs to the ground with the
provided hooks. For greater safety, we
strongly advise you also use some storm
cords in the upper part of each support
leg or anchor the awning with the Fiamma
Tie-Down Kit strap.
• If you want to fasten the support legs to
the vehicle, put the terminals into the wall
brackets. The brackets can be fixed only
in reinforced points.
105