Swift Group Bessacarr 2006, Руководство пользователя

Страница: 107 / 121

Equipment Details
103
CAB SCREENS
Front system
• Lift the arms of
both sides and
clip them to the
A-pillar. (Fig. A)
• Adjust the main
cab mirror
parallel with the
window screen.
Take the blind
trim in the middle
and carefully pull
it upwards in
front of the mirror
to the required
position.
(Fig. B & C)
• Reverse
procedure when
opening.
• When travelling always secure the arms
with the attached strap.
Side system (model dependant)
• Take the trim by
tilting and pulling
slightly from its
position. (Fig. D)
• Pull down the
trim as shown
(Fig. E) bringing
the trim into the
gap of the frame
until the magnet
closes. (Fig. F)
• Take the trim by
tilting and pulling
slightly from its
position. Close
the blackout and
close the trim
with the
magnets. (Fig. G)
• To open the blackout, take the trim by
tilting slightly to open the magnet. Form a
U with your hand and bring back the
pleated material in its position.
• Press the trim to
the frame and
secure. (Fig. H)
• To open the
blackout, hold
the trim tilting
slightly to open
the magnet.
Form a U with
your hand and
bring back the
pleated material
in its position.
(Fig. I)
A
B
C
D
E
H
I
F
G