Swift Group 2009 Charisma, Руководство пользователя

Страница: 74 / 127

Fitted equipment
78
Glass parts (if fitted)
Door panels, facia panel, hotplate lid
Do not use abrasive cleaners or polishes. Use
a mild cream cleaner, eg; Cif. Rinse thoroughly
and dry with a soft cloth.
The inner door glass panel can be removed for
cleaning; open the door wide, hold the bottom
and top edges and slide out. When replacing the
glass panel, hold it level and straight with the
grooves in the door trims before sliding back in.
painted, plastic and gold coloured parts
Door frame & handles, control knobs
Only use a clean cloth wrung out in hot
soapy water.
vitreous enamel parts
Grill pan, heatguard, oven/grill compartment(s),
hob spillage well, pan supports
Use a mild cream cleaner. Look for one that has
the Vitreous Enamel Council’s recommendation
seal, eg; Cif.
chrome plated parts (Fig 1)
Grill grid, shelves, shelf runners
Do no use abrasives or polishes. Use a moist
soap pad, eg; Brillo. Shelf runners can be
removed for cleaning.
Grasp the runners and slide out of the hanging
holes as shown in fig 1.
stainless steel surfaces
(stainless steel models only)
Only use a clean cloth wrung out in hot soapy
water, and dry with a soft cloth. Do not use
undiluted bleach or any products containing
chlorides as they can permanently damage
the steel.
Some foods are corrosive, eg; vinegar, fruit juices
and salt, and they can mark or damage stainless
steel if they are left on the surface for any length
of time. Wipe any spillage immediately.
Sharp objects can mark the surface of stainless
steel but will become less noticeable with time.
electric hotplates
Important: ensure that elements are
switched off and cool before cleaning
For normal cleaning use a clean damp cloth.
For heavy cleaning, use a clean damp cloth or
scouring pad with a cream cleaner.
Follow the circular grooved pattern on the
hotplate. Rinse off any cleansing agent
thoroughly, then switch on to a low-medium
setting for few minutes to dry. When cleaning
take care to avoid the red dot on the high
speed hotplate (if fitted).
sHarp r209 MIcroWave oven
Please refer to the appliance manufacturers
handbook regarding: operation, cooking advice,
aftercare and guarantee
Warning: the door, outer cabinet, oven
cavity, turntable and dishes will become
very hot during operation . to prevent
burns, always use thick oven gloves .
electrical connection
• Do not allow water to come into contact
with the power supply cord or plug.
• Insert the plug properly into the socket.
• Do not connect other appliances to the
same socket using an adaptor plug.
• If the power supply cord is damaged, it
must be replaced by a Sharp approved
service facility or a similarly qualified person
to avoid a hazard.
• When removing the plug from the socket
always grip the plug, never the cord as this
may damage the power supply cord and
the connections inside the plug.
• If the plug fitted to your oven is a rewireable
type and in the event of the socket outlet in
your home not being compatible with the
plug supplied, remove the plug properly (do
not cut off).