manualshive.com logo in svg

Swift Group 2009 Charisma, Руководство пользователя

Поделиться
Скачать
Swift Group 2009 Charisma Скачать руководство пользователя страница 59

Fitted equipment

63

The quantity of air can be individually adjusted 
at the air flap (f), for warm air distribution.
In centre position 50% of the warm air is 
distributed to each outlet.
Use the fan duct with 72 mm and if the fan 
ducts are of different lengths or on sides with a 
greater heat requirement. This means that the 
air output can be used to the full on this side. 
By adjusting the air flap (f) the quantity of air 
can be increased individually. This means that 
the air out-put on the other side is reduced. 
If the air output drops or the operating noise 
increases, the fan impeller wheel may be 
severely soiled. 

cleaning

(with switched off appliance!) We recommend 
removing dust which has collected on the heat 
exchanger and base plate of the heater and on 
the impeller wheel of the Trumavent fan, once 

a year before the heating season starts. Clean 
the impeller wheel carefully using a brush or 
tooth brush.

truMa ultraHeat addItIonal 
electrIc HeatInG

For trumatic s 3002 heaters
Function description

Truma-Ultraheat is an additional 230V electric 
heater for the LPG heater models Trumatic S 
3002/S 5002.
Heater operation is basically possible with gas 
only, electricity only or simultaneously with 
electricity and gas.
When using simultaneously the electrical unit 
will switch itself off before overheating occurs 
as a result of the stronger gas burner.
When using electrical only we recommend to 
set the fan control on position 3 (manual or 
auto), remembering to set the output level to 
2000W (ensure that the fuse protection for the 
power supply of the camp site is sufficient).
If more than 2kw are required (heating up/cold 
temperatures) you must refer back using gas 
operations as the 230V electrical operation is a 
secondary heater only.

The electric heater can also be operated 
without the Trumavent fans.

WarnInG: surfaces become hot in use, 
guards provided do not give full protection 
to the young or elderly

operating instructions

before operating the heater for the first 
time it is essential to observe the operating 
instructions, enclosed with the heater .

control panel with thermostat

a   =   Rotary switch “Off”
b   =    Rotary switch “On” 

power settings:  
500 - 1000 - 2000 W

c   =    Rotary control knob for room 

temperature (illuminated by green 
indicator lamp “operation”)

Содержание 2009 Charisma
































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды