44 ©2021 SwellPro Technology Co., Limited
Select several waypoints on the map, Route Planning is going to direct the SplashDrone
4 to fly in a route through the series of waypoints. The height, dwell time, and heading
can also be set for each waypoint.
5.
Grid Flight Planning
Set an area boundary on the map, Grid Flight Planning is going to create a series of
waypoints forming grid pattern routes on the map. The drone will then follow the route
and proceed with grip flight over the selected area. The spacing between routes, speed,
height can be set on the app. The number of waypoints that can be created on Grid
Flight Planning is between 3 and 256. Grid Flight is useful for search and rescue, survey,
and inspection missions.
6.
Saved Routes
Name and save frequently used routes.
7. Thumbnail Screen
Tap to switch between camera and map views.
Set the Wi-Fi Password
Set the Wi-Fi Password
To set the Wi-Fi password:
1. Connect the SDFly to the remote controller.
2. Login to the device.
3. Go to flight settings, showing as 3 dots on the top right of the interface.
4. Scroll to advanced settings and select “Set WiFi Password”.
5. Type the password you want and press “SAVE PASSWORD”.
6. Re-connect the Wi-Fi.
Reset the Wi-Fi Password
To reset the Wi-Fi password:
1. Power on the remote controller.
2. Wait for 40 seconds for the MultiSync video transmission system to boot up.
3. Press the pairing button on the back of the remote controller 5 times.
4. Wait for another 20 seconds for the Wi-Fi password reset to finish. The Wi-Fi
password is restored to the default, 12345678.
After resetting the Wi-Fi password, re-pairing the remote controller and the aircraft is
REQUIRED. To re-pair, the remote controller, and the aircraft, check the pairing part
under the remote controller section.
