©
2021 SwellPro Technology
Co., Limited 11
Install the Intelligent Battery
The Intelligent battery is quick and easy to change. Ensure the battery is OFF before
inserting or removing it from the drone.
1.
Unlock and open the
waterproof hatch
2.
Slide in the fully charged
intelligent battery and
push it into the battery
slot.
3. Close the battery hatch.
Fasten the catch and then
lock the hatch.
⚠
Always check to ensure that the waterproof seal on the hatch door is clean and
lightly lubricated.
⚠
The drone is no longer waterproof when the battery hatch is open. Do not allow
water or sand to enter the drone while the battery hatch is open.
⚠
The Appendix of this manual contains additional warnings and precautions
regarding the batteries, safety, charging, and maintenance. Please ensure you
familiarize yourself with all this information to get the most from your purchase.
Install the Camera/Accessories
1. Unscrew and take off the gimbal port cover plate
using a hex screwdriver. (Equipped with SplashDrone
4)
2. Plug the gimbal connector into the drone’s gimbal
port and screw it in place with a screwdriver.
Make sure the rubber ring is attached to the gimbal
connector before you screw the connector.
