30 ©2021 SwellPro Technology Co., Limited
1) Compass calibration needs to be performed outdoors in an open area. 2) Remove
propellers before calibration. 3) Perform the calibration process away for sources of
magnetic fields, such as large metal structures, radio signal towers, power lines or
mobile phones, etc.
Gyroscope Calibration
The gyroscope provides stability data to the flight controller. If the gyroscope is not well
calibrated, the aircraft will tilt to one side when it takes off, and the tilted angle will
increase until the aircraft can no longer fly.
Process gyroscope calibration for the following situations:
•
The drone trembles significantly during hovering in GPS mode.
•
The drone’s tilt range is too large during ascending in ATTI mode.
•
The drone drifts during ascending or descending in GPS mode.
•
The drone has been crashed or subjected to heavy shaking.
•
The remote controller screen prompts “WARNING Gyroscope error Calibrate
Gyroscope”.
Gyroscope Calibration Process:
1. Place the drone on a level surface, power on the remote
controller, then the drone. Wait for the aircraft to connect to the
remote controller.
2. Hold the left joystick down to its lowest position, then quickly
move the right joystick left to right, back and forth, until the front
and rear status indicators flash alternately, or the remote
controller screen prompts "WARNING aircraft Initializing, Please
Wait". The drone will now perform gyroscope calibration. Now
release the joysticks. This process will be completed in 20
seconds. Do not move the drone during this process.
3. When the front status indicators fast-flashing red and the rear
status indicators turn solid green, or "WARNING Aircraft
Initializing, Please Wait" prompt disappears, power off and restart
the drone. Gyroscope calibration is complete.
1) Never calibrate the gyroscope on a boat or other moving platforms. 2) When the
drone is floating on water, it may occasionally prompt gyroscope calibration, which is
normal and can be ignored. 3) If the calibration fails, the "WARNING Aircraft Initializing,
