2
Important Information
FCC Verification
This equipment has been tested and found to comply with the limits for
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interference to radio
or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions:
• These devices may not cause harmful interference
• These devices must accept any interference received, including in-
terference that may cause undesired operation
Important Notice:
All jurisdictions have specific laws and regulations re-
lating to the use of cameras. Before using any camera for any purpose,
it is the buyer’s responsibility to be aware of all applicable laws and reg-
ulations that prohibit or limit the use of cameras and to comply with the
applicable laws and regulations.
FCC Regulation (for USA): Prohibition against eavesdropping
Except for the operations of law enforcement officers conducted under
lawful authority, no person shall use, either directly or indirectly, a de-
vice operated pursuant to the provisions of this Part for the purpose
of overhearing or recording the private conversations of others unless
such use is authorized by all of the parties engaging in the conversation.
Warning:
Changes or modifications made to this device not approved
expressly by the party responsible for compliance could void the user’s
authority to operate the equipment.
Important Safety Instructions
• Make sure product is fixed correctly and stable if fastened in place
• Do not operate if wires and terminals are exposed
• Do not cover vents on the side of the device and allow adequate space
for ventilation
• Only use the power adapter supplied with your NVR
Password Information
This NVR does not have a default password. A password is created dur-
ing the Setup Wizard. If password protection has been enabled and you
have forgotten your password, you can enter a super password. Click
“Forgot Password” then input your NVR’s MAC address without the co-
lons, for example, EC71DBE32877 - see page 40 for more information.
Your NVR’s MAC address can also be obtained using SwannView Link for
Windows. Please download it from our website (support.swann.com).
About this Manual
This instruction manual is written for the NVR-7300/7400 and was ac-
curate at the time it was completed. However, because of our on-going
efforts to constantly improve our products, additional features and func-
tions may have been added since that time. We encourage you to visit
our website to check for the latest updates and product announcements.
