Swann SI9032N, Инструкция по эксплуатации

Страница: 4 / 20

1. Make sure to read all the safety precautions below and look at the illustrations
before you start using the appliance.
2. Use the appliance for its intended use only.
3. The appliance is intended for household use only.
4. In order to protect against the risk of electric shock, do not immerse iron power
base into water or any other liquids
5. Connect the appliance only to an alternating current of the voltage specified on
the rating plate and only to an earthed socket. To avoid a circuit overload, do not
operate another high wattage appliance in the same circuit.
6. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
7. During use, do not lift the appliance by power cord/supply hose.
8. Always disconnect the plug of the appliance from electrical outlet when filling with
water or emptying and when not in use.
9. Do not operate the appliance with a damaged cord or if the appliance has been
dropped or damaged, it must be taken to a qualified serviceman or manufacturer or
its service agent for examination and repair. Incorrect re-assembly can cause a risk
of electric shock when the iron is used.
10. Keep the iron and its cord out of reach of children less than 8 years of age when it
is energized or cooling down.
11. During use, always place the power base on a stable, level and horizontal surface
or ironing board, and then place the iron on the power base.
12. Place the iron on the power base. Do not allow power cord or supply hose to
touch hot surface.
13. Burns can occur from touching hot metal parts, hot water or steam. Use caution
when using the appliance. If the iron is placed onto the iron rest plate during in use,
the iron rest plate may become a hot surface. Do not touch the iron rest plate and
the soleplate until they have cooled down completely.
14. Never use the iron facing towards people because the steam can cause burns.
15. Never twist the supply hose during use.
important safeguards
04