Swann SI9032N, Инструкция по эксплуатации

Страница: 16 / 20

16
Method:
1. The filter replacemnent indicator light will blink continuosly when the filter
needs to be replaced.
2. To replace; slide water tank out from base unit, take the filter out from the
water tank, and then replace with a new one.
3. After new filter has been installed into water tank, fill water into water tank
to MAX fill level, and then slide water tank back into base unit.
(Immerse filter in water for several minutes in order to gain better performance
in future use).
4. Press steam selection switch and power ON/OFF buttons concurrently to reset
blinking indicator light
replacement of Filter