background image

1.   Follow the ironing instructions on the garment label. If there is no  
 

instruction label, but you know what kind of fabric it is, please refer to the fabric  

 

setting chart described opposite. 

2.   The fabric setting chart is only valid for plain fabrics and not for materials to which  
 

finishes, glosses etc, have been applied. Textiles to which some kind of finish has  

 

been applied (gloss, crinkle, relief etc.) is best ironed at a lower temperature. 

3.   First sort laundry according to ironing temperature setting guide: wool with wool,  
 

cotton with cotton, etc. 

4.   The iron heats up more quickly than it cools down. Therefore, start ironing articles  
 

that need to be ironed at the lowest temperature, such as those made of  

 

synthetic fibres. 

5.   If the fabric consists of various kinds of fibres, always select the temperature  
 

required by the most delicate fibres, i.e. the lowest temperature. If, for example,  

 

an article consists of 60% polyester and 40% cotton, according to the fabric setting  

 

chart it should be ironed for polyester. 

6.   If you do not know what kind of fabric the article is made of, iron a piece of the  
 

material which is not visible when you wear it to find out the appropriate  

 

temperature for your articles. 

7.   Pure woolen fabrics (100% wool) should be ironed with the iron setting to steam  
 

ironing position. It is advisable to set the selection control button to "COTTON"  

 

position and use a dry pressing cloth. 

8.   When steam ironing woolen fabrics, shiny patches may occur. You may prevent  
 

this by turning the article inside out and ironing the reverse side. 

9.   After using steam ironing for cotton fabrics, do not iron articles requiring a lower  
 

temperature (such as nylon etc.) immediately. It is advisable to adjust the selection  

 

button to the lower setting, waiting for about 2-4 minutes until the blue indicator  

 

light turns off, and then you can start ironing. 

Important Hints

Do not fill water tank with vinegar, starch, chemically descaled water or 
descaling agents. 

ironing temperature 

setting guide

09

WWW.sWan-BranD.co.uK

Содержание SI9032N





















Отзывы: