Swann SI9032N, Инструкция по эксплуатации

Страница: 11 / 20

Fill Water tank
If there is no water or not enough water in the tank, the filling indicator light on con-
trol panel will start blinking. An alarm will sound 5 BEEPs to indicate filling is needed.
1. Press the water tank lock upwards and slide the detachable water tank outwards
from the base.
2. Take the filter upwards out from the water fill hole.
(You can take the filter out of the opening for filling water into water tank,
or fill water into water tank directly with the filter already in the opening).
3. Fill the water tank up to or below the “MAX” fill line with clean tap water.
4. Replace filter back into water filling hole.
5. Replace the water tank into the base unit again. It will be locked in place with
the base when a “click” sound is heard.
6. Always pour out the remaining water after use.
Note:
When the water level in the tank falls below a certain level, the pump will
make a noise. When this happens, stop ironing and refill the tank.
11
WWW.sWan-BranD.co.uK