Swan Analytical Instruments A-85.119.010, Руководство пользователя

Страница: 59 / 131

6 - Maintenance - Repair
Calibration
Standard pH To prevent the instrument from starting compensatory
regulation upon removing the pH sensor from the overflow cell:
Š
on the Calibration menu, choose Standard pH
Š
press Enter
Š
only now remove the pH sensor from the overflow cell
and carry out calibration.
Calibration
Process pH
3.1.2
Standard pH
3.1.2.5
Standard pH
Zero Trides
Process Trides
Enter
Rinse and dry Electrode
and put it in
Standard 1
<Enter> to continue
Note:
Standard pH
3.1.2.1
If the pH value is outside the
expected range, check the
calibration solution. Besides the
loss of quality due to frequent
usage, service life of the
solution is limited:
Standard 1 7.00 pH
Current Value x.xx pH
Offset x.xx mV
Progress
<Enter> to save
- 12 months if kept at 5 °C
Standard pH
3.1.2.5
- 6 months if kept at 25 °C
For best results, make sure to
use fresh calibration solution
pH7/pH9. See
10.
4 “Consumables”,
123 for
Rinse and dry Electrode
and put it in
Standard 2
<Enter> to continue
Standard pH
3.1.2.1
ordering information.
Standard 2 9.00 pH
Current Value x.xx pH
Slope x.xx mV
Progress
<Enter> to save
Standard pH
3.1.2.5
Rinse and dry Electrode
and put it into
the Flow cell
<Enter> to continue
AMI Trides Operator’s Manual, A-96.250.101
51