Svantek Shawcity SVAN 977C, Руководство пользователя

Страница: 49 / 343

49 SVAN 977C User Manual
Summary Results saving
The Summary Results position enables saving of summary results for each
measurement cycle including results obtained from the weather station ( Meteo
results), statistics and spectra. Default value: enabled.
Logger step
Logger Step defines a period of the logger results measuring and logging in a
file. It can be selected from the set: 2 ms , 5 ms , 10 ms , 20 ms , 50 ms , 100 ms ,
200 ms , 500 ms or from 1 s to 59 s with 1-second step or from 1 m to 59 m with
1-minute step and up to 1 h . Default value: 1 s .
Logger file name
The Logger Name position allows you to
define the name of the logger file, which
consists of a prefix and a number. The
default logger file prefix is “
L
”. The name can
be of up to eight characters long. After
pressing the
◄ / ► key, the text editor
screen is opened.
►
The edited name is accepted and saved
after pressing the
<ENTER> key. The
special warning is displayed in case a file
with the edited name already exists in the
memory. The instrument waits then for your
reaction (any key should be pressed except
<Shift> or <Alt> ).
<ENT>
Splitting logger files
The Split position enables splitting the data logging into separate files. If the Split parameter is Off the data will
be logged in one logger file with the name defined in the Logger Name position. Default value: Off .
In other cases, registration will be carried out
in separate files and the registration in the
new file will start after expiration of
integration period (
Integr. Period ), or at
every quarter of the RTC ( Sync. to 15m ), or
at every half an hour of the RTC
(
Sync. to 30m ), or at every hour of the RTC
( Sync. to 1h ), or at the specified by the user
times ( Spec. Time ).
►
Whenever the split time is achieved the logger file is closed and the new file with the increased by one number
is opened for subsequent measurement data.
If Spec. Time is selected, six additional
positions appear in the end of the
Logger Setup list ( Split Time X ).
After opening each line, you can define the
time of the day when splitting should occur.
The special screen with time editor is
opened after pressing the
► key.
►