Suzuki Nexa S-CROSS series 2015, Инструкция по эксплуатации и сервисная книжка

Страница: 116 / 288

23(5$7,1*<2859(+,&/(
06(
³&58,6(´,QGLFDWRU/LJKW
52D113
When you push the “CRUISE” switch, the
system is on and a “CRUISE” indicator
light on the instrument cluster will be on.
³6(7´,QGLFDWRU/LJKW
65D474
When the vehicle’s speed is controlled by
the cruise control system, a “SET” indica-
tor light on the instrument cluster will be
on.
7R&KDQJH6SHHG7HPSRUDULO\
When the cruising speed is maintained,
you can temporarily accelerate or deceler-
ate.
To accelerate, depress the accelerator
pedal. When you take your foot off the
pedal, your vehicle will return to the set
speed.
To decelerate, depress the brake pedal.
The set speed will be canceled and “SET”
indicator light will go off.
To resume the previously set speed, push
the “RES +” switch (3) and turn on the
“SET” indicator light again when vehicle
speed is above 40 km/h (25 mph). The
vehicle will accelerate to and maintain the
previously set speed.
7R&KDQJH&UXLVLQJ6SHHG
8VLQJWKHDFFHOHUDWRUSHGDO
To reset at a faster cruising speed, accel-
erate to the desired speed using the accel-
erator pedal and push the “SET –” switch
(4). The new speed will be maintained.
8VLQJWKHEUDNHSHGDO
To reset at a slower cruising speed, decel-
erate to the desired speed using the brake
pedal and push the “SET –” switch (4). The
new speed will be maintained.
NOTE:
When the brake pedal is depressed, the
“SET” indicator light goes off until the cruis-
ing speed is reset.
8VLQJWKH³5(6´VZLWFKRUWKH³6(7±´
VZLWFK
To reset at a faster cruising speed, press
repeatedly or hold push the “RES +” switch
(3). Vehicle speed will steadily increase.
When you release the switch, the new
speed will be maintained.
To reset at a slower cruising speed, press
repeatedly or hold push the “SET –” switch
(4) until the vehicle has slowed to the
desired speed, then release the switch.
The new speed will be maintained.
NOTE:
You can adjust the set speed by approxi-
mately 1.6 km/h (1.0 mph) by pushing the
“RES +” switch (3) or the “SET –” switch
(4) quickly.