Suzuki Liana RH418, Дополнительное руководство по обслуживанию

Страница: 331 / 371

Automatic Transmission/Transaxle: 5A-105
10) Install one-way clutch No.1 (1) with snap ring (2).
11) Install carrier front thrust roller bearing (1).
12) Coat two thrust bearing races (4) with A/T fluid.
13) Install planetary pinion gear assembly (3) and
overdrive clutch hub (2) with snap ring (1).
14) Install two thrust bearing races (4).
15) Check operation of one-way clutch No.1.
Rear planetary ring gear assembly
1) Set one-way clutch No.0 to one-way clutch No.0
outer race and rear planetary ring gear.
NOTE
Make sure that thinner section “A” of one-
way clutch faces toward front side.
2) Install one-way clutch No.0 retainer (1) and rear ring
gear thrust roller bearing (2).
3) Install snap ring (3).
4) Install rear ring gear flange (3) with snap ring (4).
5) Coat sun gear thrust roller bearing race (1) and
carrier rear thrust roller bearing (2) with A/T fluid.
6) Install them.
I2RH01510169-01
I2RH01510168-01
I2RH01510167-01
I2RH01510178-01
I2RH01510179-01
I2RH01510180-01