Suzuki Liana RH418, Дополнительное руководство по обслуживанию

Страница: 243 / 371

Automatic Transmission/Transaxle: 5A-17
DTC Clearance
S3RH0B5104007
As automatic transaxle DTC can be cleared using any
one of the following 2 methods.
DTC Clearance Using SUZUKI Scan Tool
1) Turn ignition switch OFF.
2) Connect SUZUKI scan tool to data link connector
(DLC) (1) located on underside of instrument panel
at driver’s seat side.
Special tool
(A): SUZUKI scan tool
3) Turn ignition switch ON.
4) Clear DTC according to instructions displayed on
SUZUKI scan tool. Refer to SUZUKI scan tool
operator’s manual for further details.
5) After completing the clearance, turn ignition switch
OFF and disconnect SUZUKI scan tool from data
link connector (DLC) (1).
DTC Clearance Using Monitor Connector
1) Remove glove box (1) from instrument panel.
2) Turn ignition switch ON.
3) After 6 seconds or more, repeat connecting and
disconnecting diagnosis switch terminal (3) and
ground terminal (4) of monitor connector (color in
Blue) (2) 5 times at about 1 second interval within 10
seconds, using service wire.
4) Check TCM that no malfunction DTC remains in
memory of it.
(A)
2
I3RH0A510010-01
(a): Open (c): Max. 10 seconds
(b): Short (d): About 1 sec.
I3RH0B510004-01