Suzuki Liana RH418, Дополнительное руководство по обслуживанию

Страница: 274 / 371

5A-48 Automatic Transmission/Transaxle:
3 Check pressure control solenoid valve resistance
1) Turn ignition switch OFF.
2) Disconnect valve body harness connector (1) on
transaxle (2).
3) Check for proper connection to solenoid at “GRY/RED”
and “GRY/BLK” circuits.
4) Check resistance of solenoid.
Resistance of pressure control solenoid valve
Between terminals of transaxle side valve body
harness connector: 3.3 – 3.7
Ω
at 20
°
C (68
°
F)
Between terminals of transaxle side valve body
harness connector and transaxle: Infinity
Is check results satisfactory?
Go to Step 4. Replace pressure
control solenoid valve or
lead wire.
4 Check pressure control solenoid valve circuit for
ground short
1) Connect valve body harness connector.
2) Disconnect TCM connectors.
3) Check for proper connection to TCM at terminal “G08-
11” and “G08-8”.
4) If connection is OK, check continuity between terminal
“G08-11” of disconnected harness side TCM connector
and ground.
Is continuity indicated?
“GRY/RED” or “GRY/
BLK” circuit shorted to
ground. Go to Step 5.
5 Check pressure control solenoid valve circuit for open
1) Check resistance between terminals “G08-11” and “G08-
8” of disconnected harness side TCM connector.
Is it infinity?
“GRY/RED” or “GRY/
BLK” circuit open. Intermittent trouble or
faulty TCM. Check for
intermittent referring to
“Intermittent and Poor
Connection Inspection
in Section 00 in related
manual”. If OK,
substitute a known-
good TCM and recheck.
Step Action Yes No
1
2
I3RH01510276-01