Suzuki GSX1300BKA, Дополнительное руководство по обслуживанию

Страница: 52 / 108

4E-17 ABS:
Tire pressure
Refer to “Tire Inspection in Section 0B in related
manual”.
CAUTION
!
• The standard tire fitted on this motorcycle
is 120/70ZR17 M/C (58W) for front and 200/
50ZR17 M/C (75W) for rear. The use of tires
other than those specified may cause
instability. It is highly recommended to use
a SUZUKI Genuine Tire.
• Replace the tire as a set, otherwise the
DTC “25” (C1625) may be stored.
Wheel
Refer to “Front Wheel Related Parts Inspection in
Section 2D in related manual” and “Rear Wheel Related
Parts Inspection in Section 2D in related manual”.
Battery
Battery voltage inspection
1) Turn the ignition switch OFF.
2) Remove the front seat. Refer to “Exterior Parts
Removal and Installation in Section 9D in related
manual”.
3) Measure the voltage between the (+) and (–) battery
terminals using the multi-circuit tester.
If the voltage is less than 12.0 V, charge or replace
the battery and inspect the charging system. Refer to
“Battery Runs Down Quickly in Section 1J in related
manual”.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Voltage (
)
Battery voltage
12.0 V and more
4) Reinstall the front seat.
ABS Component
Wheel speed sensor – sensor rotor clearance
inspection
Inspect the clearance between the wheel speed sensor
and sensor rotor for each wheel using the thickness
gauge.
Special tool
(A): 09900–20803 (Thickness gauge)
(B): 09900–20806 (Thickness gauge)
Wheel speed sensor – Sensor rotor clearance
0.3 – 1.5 mm (0.012 – 0.059 in)
Front
Rear
ABS control unit/HU ground wire inspection
1) Turn the ignition switch OFF.
2) Remove the front seat. Refer to “Exterior Parts
Removal and Installation in Section 9D in related
manual”.
(–) ( ޓ )
(A)
I823H3450013-01
(A),(B)
I823H3450014-01
(A),(B)
I823H3450015-01