Suzuki GRAND VITARA 2008, Руководство пользователя

Страница: 235 / 308

7-12
INSPECTION AND MAINTENANCE
78KS0-37E
Refill with Oil and Check for Leaks
1) Pour oil through the filler hole and
install the filler cap.
For the approximate capacity of the oil,
refer to the “Capacities” item in the
“SPECIFICATIONS” section.
2) Start the engine and look carefully for
leaks at the oil filter and drain plug. Run
the engine at various speeds for at least
5 minutes.
3) Stop the engine and wait about 5 min-
utes. Check the oil level again and add
oil if necessary. Check for leaks again.
Engine Coolant
(For Gasoline Engine Model)
64J151
(For Gasoline Engine Model)
60A208S
(For Diesel Engine Model)
64J249
CAUTION
• When replacing the oil filter, it is
recommended that you use a genu-
ine SUZUKI replacement filter. If
you use an aftermarket filter, make
sure it is of equivalent quality and
follow the manufacturer’s instruc-
tions.
• Oil leaks from around the oil filter
or drain plug indicate incorrect
installation or gasket damage. If
you find any leaks or are not sure
that the filter has been properly
tightened, have the vehicle
inspected by your SUZUKI dealer.
EXAMPLE
EXAMPLE
WARNING
It is hazardous to remove the degas-
sing tank cap for Diesel engine when
the water temperature is high,
because scalding fluid and steam
may be blown out under pressure.
Wait until the coolant temperature
has lowered before removing the cap.
Gear Oil: 10