manualshive.com logo in svg

Suzuki DF115B, Руководство пользователя

Поделиться
Скачать
Suzuki DF115B Скачать руководство пользователя страница 24

24

THROTTLE TENSION ADJUSTMENT

The tension of the remote control handle can be
adjusted according to your preference. To
increase the tension, turn the throttle tension
adjuster 

A

 clockwise. To decrease the tension,

turn the adjuster counterclockwise.

IDLE SPEED ADJUSTMENT

The idle speed has been factory adjusted
between 650 – 750 r/min in neutral.

NOTE:
If idle speed cannot be set within the specified
range, contact your authorized Suzuki Marine
Dealer.

SETTING OF TILT UPPER LIMIT POSITION

If the outboard motor contacts the motor well of
the boat during full tilt up operation, the upper
limit setting should be reset.
Perform this set-up after the current position
setting has been canceled, as explained in the
following procedure.

CANCELING THE TILT UPPER POSITION 
LIMIT SETTING

1. If equipped with Keyless Start System: 

Turn the Keyless Start System ON.

ON & OFF

ON & OFF

PUSH
START

STOP

PUSH
START

STOP

If not equipped with Keyless Start System: 
Turn the ignition key to the “ON” position.

2. Pull out the emergency stop switch lock

plate.

3. Make sure that remote control handle is in

“NEUTRAL”.

4. Using the throttle only function of the remote

control box, move the warm-up lever upward
until the caution buzzer sounds one time.

“NEUTRAL”

Содержание DF115B












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды