Suzuki Boulevard M50, Руководство по обслуживанию

Страница: 253 / 454

6-18 FUEL SYSTEM AND THROTTLE BODY
• With the STV fully opened, install the STP sensor
1
and
tighten the STP sensor mounting screw to the specified
torque.

STP sensor: Green color coupler
NOTE:
* Apply thin coat of the engine oil to the new O-ring.
* Align the secondary throttle shaft end
A
with the groove
B
of
STP sensor.
* Apply SUZUKI SUPER GREASE “A” to the secondary throttle
shaft end
A
if necessary.

99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)

09930-11950: Torx wrench

STP sensor mounting screw: 3.5 N·m (0.35 kgf-m, 2.45 lb-ft)
NOTE:
* Make sure the STP valve open or close smoothly.
* If the STP sensor adjustment is necessary, refer to page 6-20
for STP sensor setting procedure.
• With the throttle valve fully closed, install the TP sensor
2
and tighten the TP sensor mounting screw to the specified
torque.
NOTE:
* Apply thin coat of the engine oil to the new O-ring.
* Align the throttle shaft end
C
with the groove
D
of TP sensor.
* Apply SUZUKI SUPER GREASE “A” to the throttle shaft end
C
if necessary.

99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)

09930-11950: Torx wrench

TP sensor mounting screw: 3.5 N·m (0.35 kgf-m, 2.45 lb-ft)
NOTE:
* Make sure throttle valve open or close smoothly.
* TP sensor setting procedure. (

5-19)
TPS and STPS resemble each other very closely in
external appearance.
Make sure to check the color of coupler before install-
ing.
SA
MP
LE