Sutter Instrument TRIO MP-245A, Руководство по эксплуатации

Страница: 9 / 52

TRIO MP-245A FOUR-AXIS MICROMANIPULATOR SYSTEM OPERATION MANUAL – REV. 3.12B (20191001)
7
TABLE OF FIGURES
Figure 1-1. The TRIO MP-245A system .................................................................................................. 9
Figure 2-1. Side view of TRIO MP-245/M showing mounting adapter plate and lock screws. ........ 13
Figure 2-2. Mounting the TRIO MP-245/M on the Adapter Plate ...................................................... 14
Figure 2-3. Rear of TRIO MP-245A ROE/Controller cabinet .............................................................. 15
Figure 2-4. Configuration switches on rear-panel (switch positions shown are factory defaults). .. 16
Figure 2-5. Internal configuration switches (switch positions shown are factory defaults). ........... 17
Figure 3-1. LCD Display showing startup screen. ................................................................................ 19
Figure 3-2. Startup screen ....................................................................................................................... 19
Figure 3-3. Factory default startup (Home) position ............................................................................ 20
Figure 3-4. Maximum positive values..................................................................................................... 20
Figure 3-5. Moving to Home position (screen is amber while moving) .............................................. 21
Figure 3-6. Factory default Home position ............................................................................................ 21
Figure 3-7. Example Home position defined and saved ....................................................................... 21
Figure 3-8. Example Work position ........................................................................................................ 21
Figure 3-9. Relative mode ........................................................................................................................ 22
Figure 3-10. Relative mode ...................................................................................................................... 22
Figure 3-11. Absolute mode ..................................................................................................................... 22
Figure 3-12. Angled side view of TRIO MP-245/M to change headstage mount ............................... 24
Figure 6-1. Locations of the axis connectors inside the ROE/Controller ........................................... 35
TABLE OF TABLES
Table 2-1. Rear-Panel Configuration Switches 1 - 4: Configuring the direction of each axis. ......... 16
Table 2-2. Rear-Panel Configuration Switch 5: Y-Axis Homing Movement Lock Out.................... 16
Table 2-3. Rear-Panel Configuration Switch 6: Configuring power-on positional memory or
calibration. ............................................................................................................................... 16
Table 2-4. Internal Configuration Switch 2: Electromechanical device compatibility. .................... 17
Table 3-1. Maximum positive position value of each axis .................................................................... 20
Table 3-2. Screen colors and modes ........................................................................................................ 23
Table 4-1. USB-VCP interface serial port settings. .............................................................................. 25
Table 4-2. Microns/microsteps conversion. ............................................................................................ 27
Table 4-3. Ranges and bounds ................................................................................................................. 27
Table 4-4. Get Current Position and Angle (‘c’ or ‘C’) command. ...................................................... 28
Table 4-5. Move to controller-defined HOME position (‘h’) command. ............................................. 28
Table 4-6. Move to controller -defined WORK position (‘w’) command. ............................................ 28
Table 4-7. Move to specified “Home” position (‘H’) command. .......................................................... 29
Table 4-8. Move to specified “Work” position (‘W’) command. ........................................................... 29