Sutter Instrument Lambda DG-4, Руководство по эксплуатации

Страница: 44 / 86

LAMBDA DG-4 & DG-5 OPERATION MANUAL – REV.
3.05C
(
20150414
)
30
The screen will now be blank. Enter each FILTER NUMBER by pressing the appropriate
numeric key followed by the ENTER key. Your numeric keystrokes will be echoed on the
display and the ENTER key will place a comma in the string to delimit each FILTER
NUMBER value.
When you have completed entering the desired sequence, press the ENTER key a second
time to save it to the RING BUFFER and return to the MAIN MENU.
3.7.8.3 Viewing an Existing FILTER NUMBER Sequence
To display the sequence of FILTER NUMBERS that have been stored in the RING BUFFER
access the SETUP RING BUFFER menu by pressing the MODE key followed by the 8 key.
Alternatively, you can “page” through the mode selection menus by pressing MODE. The
following menus will be displayed:
Press 1 three times to scroll through the NEXT TWO PAGES to see the desired option or
press the 0 key to abort the routine and return to the MAIN MENU.
Press 8 to view the SETUP RING BUFFER menu or the 0 key to return to the MAIN MENU.
The following display will appear if you press 8:
ENTER THE FILTER NUMBERS. TWO ENTERS IN
SUCCESSION WILL END THE STRING.
1,2,3,4,
0=EXIT, 1=NEXT PAGE, 2 = TURBO BLANKING
3 = DISPLAY THE FIRST 4 FILTER VALUES
0=EXIT, 1=NEXT PAGE. 4= MOVE ON SYNC.
PULSE, 5 FOR MOVE ON STROBE PULSE
0=EXIT, 1=NEXT PAGE. PRESS 6 FOR MOVE ON
SYNC, INHIBITED BY THE STROBE LINE
0=EXIT, 1=NEXT PAGE. 7 = EDIT A FILTER
DEFINITION, 8 = SETUP THE RING BUFFER
0=EXIT. 1 = RUN EXISTING BUFFER, 2 = TO
CREATE NEW FILTER SEQUENCE. 3 = DISPLAY