Sutter Instrument Lambda DG-4 Скачать руководство пользователя

Страница: 40 / 86

LAMBDA DG-4 & DG-5 OPERATION MANUAL – REV.

3.05C

(

20150414

)

3.7.7.4

Programming a Filter Number (“Logical Filter”)\

The Galvanometer Values that define the maximal light output through FILTER

POSITIONS 1,2,3 and 4 have been assigned FILTER NUMBERS 1,2,3 and 4, respectively, at

the factory. It is recommended that these assignments be retained but there is no overwrite

protection. If you do edit these values, the original values can be found on the Optical

Alignment Data Sheet that came with your Lambda DG-4/5. Galvanometer Values, which

maximally misalign the Input and Output Galvanometers, have been assigned FILTER

NUMBER 0. When selected, this FILTER NUMBER will prevent light output and serve as a

“logical shutter”.
The EDIT A FILTER DEFINITION mode is the operational mode from which you assign

paired Galvanometer Values a FILTER NUMBER. It is selected by pressing the MODE key

followed by the 7 key to get to the EDIT A FILTER DEFINITION menu. Alternatively, you

can “page” through the mode selection menus by pressing MODE. The following menu will

be displayed:

Press 1 three times to scroll through the NEXT TWO PAGES to see the desired option or

press the 0 key to abort the routine and return to the MAIN MENU.

Press 7 to view the EDIT A FILTER DEFINITION menu.

Enter the desired FILTER NUMBER (0-15) as described in the MOVE ON COMMAND

section; for one digit values, press the desired numeric key followed by ENTER or press the 0

key then the desired numeric key; for two digit values press the numeric keys only. Pressing

the MODE key will abort the EDIT routine, return you to the first MODE SELECTION

menu and retain the current FILTER NUMBER settings. If you have entered a FILTER

NUMBER value (e.g., 4), the following edit screen will appear:

0=EXIT, 1=NEXT PAGE, 2 = TURBO BLANKING
3 = DISPLAY THE FIRST 4 FILTER VALUES

0=EXIT, 1=NEXT PAGE. 4= MOVE ON SYNC.
PULSE, 5 FOR MOVE ON STROBE PULSE

0=EXIT, 1=NEXT PAGE. PRESS 6 FOR MOVE ON
SYNC, INHIBITED BY THE STROBE LIN

0=EXIT, 1=NEXT PAGE. 7 = EDIT A FILTER
DEFINITION, 8 = SETUP THE RING BUFFER

WHICH FILTER DO YOU WISH TO EDIT OR
CREATE?

Содержание Lambda DG-4























































































Результаты поиска

Содержание Lambda DG-4

Отзывы:

Похожие инструкции для Lambda DG-4

Бренды по названию

Популярные бренды

Sutter Instrument Lambda DG-4, Руководство по эксплуатации

Результаты поиска

Содержание Lambda DG-4

Отзывы:

Похожие инструкции для Lambda DG-4

Бренды по названию

Популярные бренды