Command
Description
Command Syntax
(command underlined)
ACCUBUBBLE response
(underlined)
"a" represents the single-
character address
XPT Manually
set
bubbler
timing
*Use after the
aXPC
command.
aXPT+ppupump_o
n+ppump_cycle!
Purge_on
: Initial pump run to purge
the line in seconds
Purge_off
: Number of seconds to
wait after the pump is run to take a
reading
Pump_on
: Number of seconds to
run between each reading of an
average. Defaults to 0.1 second.
Pump_off
: Number of seconds to
wait after pump_on before reading.
Pump_cycle
:
Maximum time in
seconds of updating analog or
quadrature outputs when in operating
mode 80 or 88. Maximum value of
90 minutes (5400 seconds)
Note: aXPT! Will return the
programmed values
a0015
indicating that the command will take
one seconds to complete and that five
values can be collected
a
Service request
arwpoc
Where r is purge time, w is wait time
after purge, p is pump time between
readings, o is pump off time before
readings, c maximum output update
cycle time.
XS Self-Cal
the
Field
Calibration
Offset
aXS! or aXSdu!
where d and u are optional. When
omitted, the sensor is assumed to be
vented to the atmosphere. When
supplied, d is the desired reading for
the sensor and in the units indicated
by u. The ACCUBUBBLE will
make a measurement and adjust the
field offset to ensure the reading
matches the value entered.
Example: 0XS!
(sensor is vented, adjust sensor to
read 0)
Example: 0XS+7.87+0
(sensor is at 7.87 feet, adjust offset to
ensure this reading)
attt1
where ttt indicates the command will be
complete in ttt seconds and 1 indicates
one value can be collected.
Note:
a D0 command issued after XS is
complete will display the new offset in
units of psi for software versions prior to
2.0. Version 2.0 and later return the
offset in the current units of pressure.
The offset can also be displayed using
the M3 command..
Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, 21300 Ridgetop Circle, Sterling, Virginia 20166-6520
39
Содержание Accububble 56-0131-50-1
Страница 2: ......