Susteco BIGHANNA T120, Руководство по эксплуатации

Страница: 130 / 139

ALARM – FAN MOTOR – INVERTER FAULT
Reset the Inverter by clicking on the lit
blue Reset button below on the screen.
When the Inverter is reset the blue reset
button on the screen goes out.
If the inverter trips again:
- Problem can be caused by dirt and dust in the fan and the ventilation pipes see below.
- Turn off electricity before cleaning pipes and the fan
- Problem can also be caused by a faulty Inverter.
If the inverter trips repeatedly - contact service personnel.

Note that this ALARM needs to be acknowledged in the ALARM list in order to turn off the Alarm
Indicator which is visible in the left hand upper corner on all screens.

Use the ALARM button to go to alarm log menu.
LOCKOUT/TAGOUT BEFORE REMOVING BOLTED COVERS.
The fan is the “lungs” of the Big Hanna – if the biological process does not get the right amount of
oxygen, the result will be bad smell. Pay attention to if the fan is vibrating or making a noise.
Check the ventilation pipes and clean if necessary – see 9.2.3.
ALARM – FAN MOTOR – FUSE TRIPPED
Reset the fuse inside the electrical cabinet.
- Problem can be caused by dirt and dust in the fan and the
ventilation pipes see below.
- Turn off electricity before cleaning pipes and the fan.
- Problem can also be caused by a faulty Inverter.
If the fuse trips repeatedly - contact service personnel.

Note that this ALARM needs to be acknowledged in the ALARM list in order to turn off the Alarm
Indicator which is visible in the left hand upper corner on all screens.

Use the ALARM button to go to alarm log menu.
LOCKOU/TAGOUT BEFORE REMOVING BOLTED COVERS.
The fan is the “lungs” of the Big Hanna – if the biological process does not get the right amount of
oxygen, the result will be bad smell. Pay attention to if the fan is vibrating or making a noise.
Check the ventilation pipes and clean if necessary – see 9.2.3.