Susteco BIGHANNA T120, Руководство по эксплуатации

Страница: 110 / 139

8.1.2 CHECK-UP WEEKLY - T60 AND T120
⇒
MAKE SURE THE AIR IS PASSING FREELY THROUGH THE VENTILATION INSIDE THE INLET.
HOLD YOUR HAND INSIDE INLET PIPE AND FEEL THAT THERE IS A SOFT AIRFLOW MAKING
SURE THAT THE FAN IS WORKING PROPERLY WHEN CYLINDER IS NOT
ROTATING.
⇒ CLEAN THE VENTILATION FILTER
⇒
CHECK THAT THE PLASTIC BAG IS WELL TIGHTENED ON THE OUTLET PIPE.
⇒
NOTE TEMPERATURE ON THE TOUCH SCREEN AND ANY SMELL FROM THE
INLET

If the temperature in the hot zone has dropped significantly check
moisture, colour, smell, filling level of material inside cylinder and
airflow to and from cylinder. Add pellets/sawdust, empty cylinder, clear
ventilation and/or adjust settings accordingly.
⇒
IF A BIOFILTER IS INSTALLED – EMPTY THE BIOFILTER USING THE
BALL VALVE.
⇒
INSPECT THE PROCESSED MATERIAL AND MAKE SURE THAT THE
MATERIAL IS NOT TOO WET OR DRY.
⇒
EMPTY BAG ON OUTLET IF NECESSARY
8.1.3 CHECK-UP WEEKLY– T60_40LS AND T120_40LS
⇒
CLEAR THE SHREDDER CABINET IF NECESSARY
8.1.4 CHECK-UP MONTHLY – CLEAN THE HEATER – T60 AND T120
⇒
CLEAN THE HEATER:
 Turn off electricity at the master switch.
 Remove the front panel.

Remove any material on the floor under the heater.
 Use a moist cloth cleaning the heater.
 Never use detergents or solvent-based products.
LOCKOUT / TAGOUT BEFORE REMOVING BOLTED COVERS.