Susteco BIGHANNA T120 Скачать руководство пользователя страница 10

 

 

 

WARRANTY  

The Composter is manufactured in stainless steel and all details are chosen with high quality as a 

requirement. The proven durability is 20 years provided the machine is cleaned and serviced on a 

regular basis. The machines are sold with a 14 months machine warranty (unless a separate 

agreement is made). 
 
Susteco AB guarantees to the Customer that the Composter delivered hereunder will be free from 

defects in material or workmanship. This warranty shall apply only to defects appearing within 14 

months from arrival of the Composter in designated port.  
1.

 

Susteco AB’s obligation under this warranty is limited to the repair or replacement of part which is 

defective in material or workmanship and declared as such to the distributor and/or Susteco AB 

within the warranty period.  

2.

 

The defective part shall be returned to Susteco AB if it is deemed feasible to return the part. The 

parties shall mutually decide on the appropriate procedure. Defective parts shall be at the disposal 

of Susteco AB.  

3.

 

The liability of Susteco AB under this warranty, or for any loss or damage to the Composter or any 

part thereof, whether the claim is based on contract or negligence, shall not in any case exceed the 

cost of replacing defected part of the Composter as herein provided. Upon the expiration of the 

warranty period all such liability shall terminate. The foregoing shall constitute the exclusive 

remedy of the customer and the exclusive liability of the manufacturer.  

4.

 

The Customer must make a claim in writing to Susteco AB or the Distributor that the Composter is 

defective within a reasonable time after he/she has noticed or should have noticed the defect.  

5.

 

This warranty shall not apply to the Composter if it has been subjected to accident, unauthorised 

repair or alterations, misuses, abuse, neglect or improper storage handling or maintenance or as 

otherwise set forth in Section 6 below.  

6.

 

This warranty does not apply to damages to the Composter (or its components) caused by 

a) modification, change or adjustment in any manner whatsoever without the written approval of 

Susteco AB; 

b) improper operation or installation in accordance with Susteco AB’s instructions; 

c) improper repair, inspection, maintenance or service in accordance with Susteco AB’s instructions, 

in due time and by skilled personnel duly trained by Susteco AB or by instructors authorised by 

Susteco AB; or 

d) normal wear and tear or deterioration

 

7.

 

For parts supplied in replacement of defective parts Susteco AB grants the corresponding warranty 

as for the original parts. 

 

 

In no event, whether as a result of breach of contract or guarantee or alleged negligence or strict 

liability, shall the Seller be liable for special, incidental, economic, consequential or personal injury 
damages, including but not limited to, loss of profits or revenue, whether achieved or projected, 

loss of use of the Composter or any associated equipment, cost of capital, cost of substitute 

equipment, facilities or services, downtime costs, or claims of customer of the Customer for such 

damage. 

Содержание BIGHANNA T120












































































































































Отзывы: