SurfRAID LC16 Series, Руководство пользователя

Страница: 25 / 47

SurfRAID LC16 Series User’s
Manual 25
B. SurfRAID LC16.200F
The “Fibre Params” consists of two categories. Each category is used to configure an
independent FC-AL of the
SurfRAID LC16 subsystem. The following shows the both categories. Each
category has sub-menus and options.
Sub-menu option Settings Default setting
311 & 322
Set SCSI ID
0, 1, 2, 3, 4, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12,
13,14, Multiple 0
Description: Use to specify the SCSI ID for the
SurfRAID LC16
Sub-menu option Settings Default setting
312 & 322
Termination
Enable, Disable Enable
Description: Use to enable the SCSI termination of the SurfRAID LC16
Sub-menu option Settings Default setting
313 & 323
TAG Queuing
Enable, Disable Enable
Description: Use to enable the SCSI Tag Queuing feature. This feature allows the
handling of more I/O requests from the host improving the performance of
the
SurfRAID LC16
Sub-menu option Setting Default Setting
314 & 324
Speed
Ultra3, Ultra2, Ultra-
Fast Ultra3
Description: Use to enable the Ultra-SCSI feature. This feature allows to increasing the
I/O speed on host Interface from Fast-SCSI to Ultra-SCSI.
Sub-menu option Setting Default Setting
315 & 325
Wide
Enable, Disable Enable
Description: Use to enable the Ultra/Fast Wide SCSI feature. This feature allows to
increasing the I/O speed on host Interface from SCSI to Wide SCSI.
Sub-menu Sub-Menu Sub-Option Setting Default
316 & 326
Lun Map
3161 Lun 0 Slice 0
3162 Lun 1 Slice 0
3163 Lun 2 Slice 0
3164 Lun 3 Slice 0
3165 Lun 4 Slice 0
3166 Lun 5 Slice 0
3167 Lun 6 Slice 0
3168 Lun 7
Array 1
Array 2
Array 3
Array 4
Slice
0,1,2,3,4,5,6,
7& Disable
Slice 0
Description: Use to setup each Slice to map a logical Lun Number.
3. Fibre Param
31 Primary FC-AL
32 Secondary FC-AL