SurfRAID LC16 Series User’s
Manual
16
2.3
SPACE REQUIREMENT
When selecting a location for your system, be sure to allow space for the system. The system has
vents that require a minimum of 3 inches of unobstructed space for airflow. Openings in the
equipment should not be blocked; or there may be a reliability problem with your system. A system
product should never be place around a radiator or heat register.
2.4
SYSTEM CONNECTING
Connect all cables and power cord as shown below:
WARNING
: Make sure that all the devices are powered off before connecting or removing cables to
prevent power spikes which can damage technical components.
2.5 Installing Disk Cartridge
The
SurfRAID
LC16 includes sixteen removable disk cartridges. The following sections describe how
to install disks into
SurfRAID
LC16 subsystems.
2.5.1 Removing the disk cartridge
1.
Slide the latch to the unlocked position.
2.
Release the cartridge handle by sliding the release-button.
NOTE:
If the
SurfRAID
LC16 is on line, the disk LED will turn from green to
Red to indicate the disk is powered down.
3.
Lift the handle to disengage the disk cartridge from the slot.
4.
Gently pull the disk cartridge out of the slot.
