8
LOADING THE DISPENSER
·
Ensure the dispenser has achieved proper operating temperature by running empty for
one hour before loading product to be dispensed.
·
Product being placed inside the refrigeration compartment should be cooler than 41º F or
5ºC. Some jurisdictions require dairy products to be dispensed from original dairyfilled
containers. The product may be transferred from the original dairyfilled containers into
clean and sanitized tanks to which delivery tubes are attached. The filled tanks are placed
in the refrigerated product compartment.
·
Sanitize your hands or wear clean gloves to load the dispenser.
SureShot Dispensing Systems® Liquid Dispensers are manufactured with four delivery systems:
Bags:
The product is supplied in sanitary prepackaged bags with attached delivery
tubes. The bags are placed in product cases that are placed within the refrigerated
product compartment.
Bag in Box:
The product is supplied in sanitary prepackaged bags in boxes that fit in the
refrigerated product compartment.
Tanks:
The product may be transferred from the original dairyfilled containers into clean
and sanitized tanks to which delivery tubes are attached. The filled tanks are
placed in the refrigerated product compartment. Stainless steel and plastic tanks
are available.
Fill in Place: Sanitized tanks may be refilled without removing them from the dispenser.
LOADING: Product Bags
Sanitize your hands or wear clean gloves to load the dispenser.
1.
Place the bagged product in the product case
provided with the dispenser. Make sure the bag
fitment is positioned so the product delivery tube
is inserted through the opening at the bottom
front of the case and is perpendicular to the
dispensing valve.
2.
Open the door to the refrigerated product
compartment.
3.
Open the valve door by unscrewing the black
knob in a counterclockwise motion to loosen the
screw.
4.
Insert the product case in the refrigerated
product compartment, with the tube facing out to
the front.
5.
Make sure there are no kinks or twists in the
product delivery tube.
6.
Remove the polyethylene film covering the
product delivery tube.
7.
Align the product delivery tube in the central
vertical groove of the valve block. Do not pull or
stretch the product delivery tube.
8.
Close the valve door, making sure the product
delivery tube is in the vertical groove and is not
kinked or pinched.
Loading Product Bag
Loading Product – tube alignment
