SureCall | 48346 Milmont Dirve, Fremont CA 94538 | 1-888-365-6283 | [email protected]
12
The CM222W multi-band plastic antenna is an omni-directional interior antenna that
gathers signals from all sides. Range of antenna is dependent on three factors:
1)physical obstructions, 2) power generated by booster and 3) reception from
outside signal received and distributed by outside antenna.
Besides the antenna itself, parts
include mounting equipment for
either a flat horizontal surface or
a wall. It should be mounted in
an upright position for best results.
Step 1: Drill a 35mm diameter hole in the ceiling. The ceiling thickness should be 20mm,
maximum.
Step 2: Unscrew fixing nut from antenna. Place antenna cable through hole. Screw the
fixing nut back onto antenna and cable on crawl space side of ceiling and fasten.
Step 3: Attach the N-Female connection from the interior antenna to the cable leading
to the connector labeled INSIDE, on your booster.
Step 4: Tighten fixing nut to secure antenna (do not over-tighten).
• Storage and transportation: Store and place in non-extreme room-temperature and dry
environment
• Attention: This antenna should not be used near open fire or flame
Installing Your Hardware
